How to check if your IQOS 3 MULTI device is charged:
Press the button on your IQOS 3 Multi device; the battery status lights (at the bottom of the device) should turn on. If they don’t, press and hold the button for 4 seconds until the small light turns on. The battery lights should stay on once you press the button again.
If you do not see any lights, charge your IQOS 3 MULTI by closing the lid and using the official IQOS AC Power Adaptor and cable for at least 20 minutes*. We recommend that you fully recharge your IQOS 3 MULTI. This can take up to 75 minutes. Once fully charged the battery status lights will turn OFF.
* Note that laptop USB ports may not have enough power to charge your pocket charger. We recommend using an electrical outlet instead.
If your IQOS 3 MULTI is charged, but still not working, the next step is to reset the IQOS 3 MULTI device.
Press and hold the button on your IQOS device for approximately 10 seconds. After the lights fade, continue holding the button for 2 more seconds. When you release the button you will see all the lights briefly blink white.
Does it feel difficult to draw on your HEETS while using your IQOS 3 MULTI? Not getting enough aerosol when using your IQOS 3 MULTI? These issues can likely be resolved by using the IQOS cleaning tool and cleaning sticks.
Cleaning your IQOS 3 MULTI regularly and with the right tools will not only ensure that you are getting the optimal real tobacco taste experience; but it can also solve some of the issues you may be experiencing with your IQOS 3 MULTI.
If your IQOS 3 MULTI device is not starting, sometimes residual tobacco can prevent it from starting. Simply remove the cap and clean the flat surface next to the heating chamber as well as the inside of the cap using an IQOS cleaning stick.
Does your IQOS 3 MULTI device have a blinking red light or a white light blinking twice?
This could be because your IQOS 3 MULTI device is too cold or too hot. IQOS 3 MULTI operates in a temperature range between 0° and 50° C. If the ambient temperature is low, try warming the device in your hand for at least 1 minute. If it is too hot, take it with you to a colder place and it should be working again once it has cooled down.
Check to see if your IQOS 3 MULTI has a broken blade or any other physical damage. If it does, we are sorry that this happened to you. Please contact Customer Care and we will support you with this issue.
Sometimes the cleaning of your IQOS 3 MULTI can damage the blade inside your IQOS. Be careful not to exert force onto the blade when cleaning your IQOS 3 MULTI. Also ensure you never twist your HEETS tobacco stick while it's in the holder. This movement can damage the heating blade and disrupt your IQOS experience.
Still have questions about IQOS?
We are here to help you across multiple channels
Available everyday from 8:00 to 22:00 (10:00 - 17:00 during holidays)
IQOS Email Support
Send us your query. We will respond within 24 hours
IQOS on Facebook
Visit our IQOS Facebook page
IQOS on Twitter
Get in touch with IQOS support on Twitter
IQOS Phone Support
Want to speak to one of our IQOS support experts?
Call us at 801 801 501 or 22 455 14 04.
Find your answer online
Full FAQs available here
IQOS Live Chat
Talk to one of our IQOS experts live
We will respond within a few minutes
This site contains information on a product containing tobacco and is reserved for smokers over 18 years old residing in Poland. All forms of tobacco are harmful and addictive. The administrator (controller) of your personal data is Philip Morris Polska Distribution Sp. z o.o., based in Kraków (31-982), al. Jana Pawła II 196 [PMPL-D]. Your data may be processed in order to: 1) conclude and execute a sales contract through the website, 2) conclude and implement a contract for the provision of services provided electronically in accordance with the terms of the website, 3) contact from PMPL-D, and/or 4) marketing of own PMPL-D products and services. The legal basis for processing is art. 6 paragraph 1 letter b) or f) of the General Data Protection Regulation (GDPR). Your data may be shared for these purposes by entities belonging to the Philip Morris International Inc. group of companies, including in particular Philip Morris International Management SA, based in Switzerland, av. de Rhodanie 50, 1007 Lausanne (full list of entities is available at www.pmi.com) and our subcontractors. Data processed in order to perform the contract will be processed for the duration of the contract and for the period of limitation of claims arising therefrom, including claims of public (tax) authorities. You have the following rights: a) access to data and receipt of copies, b) correction of data, c) deletion of data, d) limitation of data processing, e) objecting to processing, f) data transfer, g) lodging a complaint with the supervisory authority. Your data will not be processed in an automated manner and will not be profiled. Further information regarding data processing by PMPL-D can be found in the Privacy Notice at the bottom of the page.