IQOS 3 DUO

You can use the IQOS AC Power Adaptor from the previous device versions. However, IQOS 3 DUO USB cable hosts a USB-C port, which is different from that of IQOS™ 2.4+.

Your IQOS 3 DUO device is designed to work in a wide range of temperatures, but HEETS tobacco sticks taste best when you use the device between 0℃ and 50℃. 

Current warranty duration applies (as for standard device versions). However same variant replacement is subject to stock availability.

Yes, functionality of the product is the same.

It takes approximately 120 minutes (two hours) to fully charge your IQOS 3 DUO Pocket Charger from an electrical outlet, using the IQOS AC Power Adaptor and USB cable.

IQOS ProtectPlus™ introduces a number of improved features related to design and technology to redefine the concept of protection and reliability of IQOS 3™:

• robust outer shell improves shock resistance of the device
• new side door opening tested to guarantee reliable device performance 
• new technology provides longer battery life 
• electronic chamber* of your IQOS 3™ Holder has been redesigned for improved device reliability

* Electronic chamber refers to the area of the IQOS™ Holder, where the electronic elements are located.

If you already have an IQOS 3 device and would like to use your IQOS 3 DUO Holder with the IQOS 3 Pocket Charger, you might need to upgrade your firmware.
To understand whether your current IQOS 3 requires an upgrade, do the following:
1. Fully charge your IQOS 3 DUO Holder and insert it in the IQOS 3 Pocket Charger
2. Press the Pocket Charger button to check the Holder status light:
a. If the light blinks once – need upgrade
b. If the light blinks twice – no need for upgrade
You can upgrade the firmware of your device in the IQOS Store. It is free of charge.

After the upgrade you will be able to charge and use your IQOS 3 DUO Holder with the IQOS 3 Pocket Charger.

IQOS 3 Holder vibrations are activated in the following situations:

• At the start of the heating (once you press the Holder Button to start) - one vibration
• When the device is ready to be used – two vibrations
• When the experience is nearly complete (30 seconds prior the end)  - two vibrations

IQOS 3 DUO enables to have two consecutive uses without Holder recharge. They will be indicated by the two white LED lights on your Holder and Pocket Charger.
 
Once you have finished the first use, there will be only one light left, i.e. 2 LEDs on – 2 uses ready, 1 LED – 1 use.

If you need the second use right away, your Holder is instantly ready for it.

If you do not need the second use right away, simply put the Holder back in the Pocket Charger for a quick recharge to have 2 uses back again. 

In most cases, you can charge Holder back to at least one experience faster than Holder 

You can check the Holder status (how many uses are available without recharge) in two ways – either on the Holder itself or on the Pocket Charger:

To check the status on the Holder:
- Press & release the Button of the Holder:
o 2 lights – ready for two uses
o 1 light – ready for one use
o No light – Holder not charged

To check the Holder status on the Pocket Charger:
- Press & release the Pocket Charger Button
- 2 lights – ready for two uses
- 1 light – ready for one use

On IQOS 3 DUO P. Charger       On IQOS 3 P. Charger*

* For those customers who use a mixed version of IQOS 3 DUO Holder in the IQOS 3 Pocket Charger. In some cases it may be required to upgrade the firmware of IQOS 3 Pocket Charger to know when the Holder is ready for 1 use.

You can easily reset your IQOS 3 DUO device by pressing and holding the Pocket Charger Button for 10 seconds (until lights fade out), then releasing. 
All Status Lights will turn OFF, blink three times, and progressively fade in, to confirm the RESET.

No, the IQOS 3 DUO Pocket Charger is not compatible with previous IQOS versions.
If you insert the IQOS 2.4 PLUS Holder into the IQOS 3 Pocket Charger, the Holder won’t fit because they’re different sizes.
If you accidentally insert the IQOS 3 Holder into the IQOS 2.4 PLUS Pocket Charger, the Pocket Charger lights will start blinking, but the Holder won’t charge.
Make sure you always charge your IQOS 3 Holder with the IQOS 3 Pocket Charger.

IQOS 3 DUO device does not require a full charge to work, however we recommend to fully charge the device before the first usage.
If the IQOS 3 DUO Pocket Charger is fully charged, you may use the Holder up to 20 times.
The Holder charging time is effective only if the IQOS 3 DUO Holder is fully charged the first time or after being fully depleted.

It takes approximately 120 minutes to fully charge the IQOS 3 DUO Pocket Charger from an electrical outlet. Only charge IQOS 3 DUO device using IQOS AC Power Adaptor and USB cable.

You can easily check the charge level by following these simple steps: 

1. Press Pocket Charger Button for 1 second (short press)
2. The Battery Status lights will turn on and indicate the level of charge:

4 LEDs = more than 75% charged
1 LED  = low charge. Need to charge

The new IQOS 3 DUO has our fastest and most powerful Holder within IQOS family.
Inspired by our customers, it has been designed around your needs to enjoy the IQOS moment your way:
- It enables to enjoy two consecutive uses without Holder recharging
- Faster Holder charging allows you to focus on your enjoyment and not worry about recharge:
• At least 2min 20sec faster than charging the Holder of IQOS 2.4 Plus*
• At least 1min 40sec faster than charging the Holder of IQOS 3*
- It hosts our IQOS ProtectPlus™ System for better protection and reliability and NFC chip for easy registration and access to IQOS website 

*provided IQOS 3 DUO Holder is fully charged the first time or when fully depleted; and applicable for charging IQOS 3 DUO Holder from 0 to 1 use. It may depend on conditions of use, on battery lifecycle, weather conditions and device usage.