IQOS 3 Diagnostic Tool | IQOS Poland

Language English

IQOS ILUMA PRIME

IQOS ILUMA

IQOS ILUMA ONE

IQOS ORIGINALS DUO

IQOS 3 DUO

IQOS 3

IQOS 3 MULTI

IQOS 2.4 PLUS

Resetting your IQOS

If your IQOS 3 DUO is charged but not working, you might need to reset it. Press the charger button until the lights fade, then release the button. All status lights will turn off, flash twice, then slowly reappear, to tell you the reset was successful.

Is your IQOS charging too slowly?

Make sure you’re using the official IQOS cable and AC power adaptor, as charging your IQOS from a computer USB port or using a third-party cable can be less effective.
If your IQOS 3 DUO Pocket Charger is already fully charged when you connect it to a power supply, the status light may flash. This is normal. If your IQOS 3 DUO Pocket Charger is completely out of battery,you might need to plug it in with the AC adaptor for up to 20 minutes before any status lights appear.

Are the status lights flashing?

Lights are blinking white twice: Your IQOS 3 DUO might have a temperature issue. You may need to let it cool down or warm up in your hands. If that’s not the case, try inserting your IQOS 3 DUO Holder into your Pocket Charger for auto-cleaning.
Lights are flashing red: Try resetting your device. If the flashing lights don’t stop, then get in touch with us so we can help.

Is air not flowing through device as it should?

Your IQOS 3 DUO Holder might need a clean.

Wait for your device to cool down, before sliding the cap upwards to remove it.
Insert the IQOS cleaning tool and rotate gently. If you do this regularly, you’ll reduce any tobacco build-up.
As some parts of your device, including the heating chamber, can't be accessed with the cleaning tool, use your cleaning sticks instead. Use them gently to avoid breaking or damaging the blade.

What to do when there's a temperature issue

The IQOS 3 operates in a temperature range between 0° and 50° C. If the temperature goes too high or too low, then you might see a red light on your IQOS 3 Pocket Charger, or a double flash on the battery status light when you press it.

If you think your device is too hot, take it to colder spot and allow it to cool down. If you think your device is too cold, try warming it in between your hands for a minute or so.

A broken blade or other damage?

The blade can break if you use too much force when cleaning the holder, so make sure you clean with gentle fingers and when inserting a HEETS stick, avoid twisting it.

If your device is damaged, let us know. We will check if you are eligible for replacement and if you are. we will arrange it for you.